Last but not least, cover the Paint Brush in a sopping wet rag like the burrito you forgot to wrap earlier. This will buy you some time before you can clean the paintbrush properly or use it again.Leave the Paint Brush in the container, cover it in plastic, stick the handle out the end, and tape it around the can to keep it moist until the next paint coat is applied (but not for too long). This appears to be quite similar to the Maxwell House Coffee Container from earlier. If plastic and masking tape are still unavailable, and the time between coats is short, drape the sopping wet rag over the top of the paint bucket, keeping the Paint Brush in place. You can try here Alpha Omega Painters – Burnsville residential painting
This method works best for Latex waterborne paints.There are a few things you can do if your paintbrush has hardened. If you use a wire brush to remove dried caked-on paint without first softening it, the bristles will be damaged, and the paint will not be removed entirely. Soak the dried paint in the Maxwell House Lacquer Thinner container, even though it’s a Latex. Brush off the paint with a long-handled BBQ-style steel wire brush as it starts to loosen in the bristles.
Paint Brush Care and Maintenance includes getting dried paint out of bristles and learning how to remove it properly. When it isn’t in use, it isn’t used. Latex and alkyd paints are stripped with lacquer thinners. This can take several applications and soaking time, depending on how much paint was dried into the painting process. After it’s been cleaned, cover it in the plastic described earlier to keep it secure. This cleaning can be done outside on a thick canvas drop cloth, which can then be dried.