Steps To Follow In The Tree Removal Process

Although tree removal seems to be a simple operation, it is really more involved than most people believe. There are many stages to take, as well as a number of safety concerns to consider. It is possible that someone could be harmed or valuable property may be damaged if sufficient planning is not done ahead of time. Bringing in a professional with the expertise and knowledge needed to safely and successfully remove the tree is the best way to guarantee that all of the proper measures are taken. You may find more details about this at Eddie’s Bronx Tree Removal

When removing a tree, the following steps are taken:

Making a Strategy

The first stage is to make a plan to ensure you’ve considered all of the important information of the tree removal, such as the tree’s height, closeness to other buildings, and which direction the tree is leaning. This information will assist you in deciding the method to use to cut down the tree.

If you just have a limited amount of area, you can try cutting the tree down in sections. As an example, if you need to chop down a 120-foot-tall tree but only have a 50-foot-wide area, you’ll have to chop it down in three 40-foot cuts. But before you do that, you must first take care of its branches, starting from the bottom and working your way up.

When you start the tree removal procedure, you may come into a number of things that work against you or in your favour. One of the criteria that will decide the simplest direction to bring the tree down is its natural lean; unless there are structures, buildings, or other immovable items in the path that you do not want harmed.

You’ll need to think about all of the safety problems, such as inspecting neighbouring power lines, structures, electrical, and plumbing to ensure that none of these are harmed throughout the process. Following the safety standards will also guarantee that the tree does not injure anybody or cause property damage if it falls on its own. You should also be able to figure out the best approach to cut down large branches and make sure your chainsaws and other instruments are up to the task.


Using a rope and harness to assist you climb the tree and a chain saw to snip off branches as you go are two common cutting methods. Smaller branches are normally allowed to fall naturally, but bigger and more hazardous branches must be handled with care. A spar pole rigging will enable you to rig the branches, cut them, and safely drop them to the ground with your colleagues.

The most sophisticated method of tree cutting is known as whole-tree rigging. Nobody climbs the tree in this method. Rather, the tree was cut down in large chunks, each wired so that it could be safely lowered to the ground. Furthermore, since it hangs a few feet from the ground, its branches have been lopped. It is the most time-consuming and costly form of tree removal, but it ensures the safety of everyone in the area as well as their property.

Getting Rid of the Stump

The stump will be the last element of the tree removal procedure after the limbs and trunk have been brought down. There are many techniques for getting rid of it, including: -Burning it out.

-Injecting it with a chemical to kill it.

-With the aid of a stump grinder.

-I’m digging it up.

-Getting rid of it organically by removing its back and allowing it to decompose naturally.